Lodestar CL0.5 BM
Description
Lodestar CL0.5 BM model is an advanced solution for fault detection. The registering of faults is based on special intelligent algorithm, that makes possible to detect PtG fault and its direction from 0.5A.
No need in additional pole-mounted RTU device anymore. Indicators communicate with one CL0.5 BM device via Bluetooth radio signal, then CL0.5B Master communicates by GSM with KOMORSAN and transmit data to any SCADA-System via IEC 60870-5-104.
Lodestar CL0.5 BM benefits:
- Minimum fault sensing 0.5 A.
- Detection of direction of all types of faults.
- Brightest Light 360° Visibility — 6 ultra bright wide-angle LEDs provide overlapping fields of light.
- Simple installation — using a single hot stick.
- Dynamically changing sensitivity based on a load current.
- Data transmission to SCADA system via DNP3 protocol.
- Connection to any existing SCADA easily via IEC 60870-5-104 by using KOMORSAN software.
Technical characteristics
| PARAMETER | VALUE |
| Types of registered events | PtP, PtG |
| Short circuit current sensitivity | 20 A |
| Automatic fault current threshold adjustment | + |
| Zero sequence current sensitivity | 0.5 A |
| Detection of direction of zero sequence current flow | + |
| Voltage monitoring | + |
| General description of devices | |
| Overhead line voltage range | 6-35 kV |
| Grid's frequency | 50/60 Hz |
| Visual indication | - Blinking ultra-bright LEDs; - Detection range up to 100 m (during the day), up to 500 m (at night); - A set of sequences, depending on the capability of the model. |
| LED brightness | At least 20000 mcd per LED, 360° view |
| Number of alarms stored in the internal non-volatile memory | up to 20 000 |
| Remote control (for field config) | Bluetooth BLE (2,4 GHz) |
| Remote communication | Lodestar CLXX-Master is equipped with a GSM channel, for transmitting information from the indicators to the data collection server. |
| Types of actuation control | - Visual; - By short-range radio channel (handheld remote control) - Remote via Komorsan & SCADA |
| Reset display | - voltage restoration; - by timer; - magnet; - from the portable control. |
| Indicator health control | - magnet; - portable remote control; - remotely. |
| Changing settings (setpoints) | - on the short-range radio channel using a portable remote control; - Remotely using the «KOMORSAN Web-client» software. |
| SMS notification | - up to 5 phone numbers; - Composition of the message: GPS coordinates, type of accident, serial number. |
| Reading GPS coordinates | Yes |
| Time to prepare the kit for repeated triggering | no more than 3 sec. |
| Integration with SCADA systems | - Connection to any existing SCADA easily via IEC 60870-5-104 by using KOMORSAN software; - Built-in GSM modem (for Lodestar Master FPI); - Data transmission to SCADA system using DNP3 protocol. |
| Source of power | - 3 removable lithium batteries (19 Ah) in Lodestar CLхх Master; - 1 removable lithium battery (19 Ah) in Lodestar CLхх S. |
| Total indication time | > 2000 hours |
| Indicator life | 130000 hours |
| Battery life (in standby mode) | 8-10 years |
| Thresholds | |
| Absolute current threshold | 20÷1000 A |
| Differential current threshold in A | 20÷500 A |
| Differential current threshold in % | 50÷500% |
| Current withstand (IEEE495, 4.4.7) | 25 kA/500 ms |
| Inrush current restraint | 0-200 ms |
| Setting the reset timer | Arbitrarily from 1 hour to 8 days |
| The minimum duration of the emergency process | 0,02 s |
| Exploitation | |
| Installation location | On the overhead line (conductor) |
| Conductor diameters | 5-40 mm |
| Installation on live line | + |
| Temperature range | Operating at an ambient temperature from - 40 °С to + 85 °С |
| Protection class | IP 68 according IEC |
| Impact of climatic environmental factors | - Resistant to UV radiation; - Resistant to wind load of 40 m/s without ice and 23 m/s with ice with 35 mm wall thickness. |
| Impact of mechanical factors | - Corresponds to exploitation group M1; - Resistant to galloping. |
