Drive position sensor DP-4
+7 499 450-55-07
office@a3.energy
arabic language

DP-4

DP4
dp4-4_1464920406_4827
Description

Tap sensor DP4 is designed to determine actual transformer tap on load. This sensor may be connected to the MZ- 2, MZ-3, MZ-4 type drives. Sensor DP4 is an electronic sensor of drive turn angle with a signal conversion circuit. It can be used instead of a resistive sensor. Sensor DP4 has several interfaces in order to transmit the drive turn angle. These are: interface RS-485 for the transformer tap data transfer to PCS or UP 25 OLTC Position Monitors in digital form via MODBUS protocol. “Current loop” analog current interface 4-20 A, 0-5 mA or 0-20 mA is designed for the transformer tap data transfer to UP 25 OLTC Position Monitors or PCS by additional transmitters.

Analog interface 0-5 V or 0-24 V is used for the transformer tap data transfer to UP 25 or PCS by additional transmitters. When using this interface, sensor DP4 can function as a resistive sensor of MZ-2, MZ-4, EM1, MR and ED-S drives, the sensor can be used to connect Siemens and ABB transformer protection and control automatics to drives..

Documentation is provided upon request to the company's clients. Please fill in the form to send a request:

+

By sending this form, I consent to the processing of my personal data.

Catalogue

english language catalogue

Catalogue A3 (english) Catalogue A3 (english) - DOWNLOAD 



Our customers

Telegram ANTRAKS Group Viber ANTRAKS Group WhatsApp ANTRAKS Group Linkedin ANTRAKS Group Youtube ANTRAKS Group