Lodestar CL25B
Lodestar CL25B models is a simple solution for fault detection. Optimal factory settings allow CL25B to be used without any configurations in most cases. Just activate the device and place it on a conductor - CL25 will do its job in the best possible way.
Lodestar CL25B use radio channel and all settings can done remotely via Smartphone - no need to unmount device. For Lodestar CL25B there is a possibility to trasmit data via Communication box.
CL25B fault indicators operate independently of each other. It means that current and voltage values can be read from each phase separately.
Lodestar CL25B benefits:
• Brightest Light 360° Visibility - 3 ultra bright wide-angle LEDs provide overlapping fields of light;
• Simple installation - using a single hot stick;
• Easy to replace - no additional settings are required;
• Dynamically changing sensitivity based on a load current;
• Minimum fault sensing 25A;
• Auto-Detect Network Frequency — intellectual algorithms allow it to work in networks with frequency of 50 or 60Hz without reconguration ;
• Enhanced resistance to interference conditions in the air.
Technical specifications
| PARAMETER | VALUE |
| Operating parameters | |
| Operating voltage | 6-35 kV 36-70 kV (option with Faraday cage) |
| Operating current | 0-1000 A |
| Operating frequency | 50/60 Hz |
| Conductor size | 5-40 mm / 19,6-1256 mm² |
| Fault sensing | |
| Type of faults | PtP faults PtG faults Transient faults |
| Detection of earth fault direction | Forward & Backward (Lodestar CL0.5)* |
| Absolute threshold | 20 A ... 1000 A |
| Differential thresholds | 20 ? … 500 A / 50 % ... 500 % |
| Minimum fault sensing (PtG) Zero sequence thresholds/3I0 |
0.5 – 100 A (Lodestar CL0.5) 2 – 100 A (Lodestar CL2) 4 – 100 A (Lodestar CL4) |
| Response time | 20 ms |
| Fault notification | |
| Visual | Ultra bright LED (white) ? 100 m – day time @sunny weather ? 500 m – night time |
| Resistance | |
| Current withstand | 25 kA /500 ms |
| In-rush resistance | 0-200 ms /step 20 ms |
| Communication | |
| Short-range communication technology | Built-in BLE module, 50 m |
| On-site configuration and control | Mobile App Lodestar (Android, iOS) |
| Long-distance communication | Pole-mounted communication box (GSM) |
| Fault management software | KOMORSAN |
| Reset | |
| By timer | 1 hour ... 8 days (configurable) |
| Remote | Lodestar App, KOMORSAN |
| Reenergized line | By voltage |
| Manual | Magnet |
| Physical characteristics | |
| Dimensions | 140 x 114 x 158 mm |
| Weight | 0.55 kg |
| Housing | UV resistant polycarbonate |
| Ambient conditions | |
| Temperature range | -40 ... +75 °C |
| IP protection | IP68 |
| Salty fog | Resistant (IEC 60068-2-11) |
| Installation | |
| Installation tools | Dielectric rod Lodestar hotstick tool adaptor |
| Installation method | Live line |
| Battery | |
| Battery type and capacity | Lithium, 19 Ah, 3.6 V |
| Battery life time | >1000 h, >7 years |
| Low battery alarm | At 20 % of remaining battery load - visual by LED blinking (yellow color) - KOMORSAN notification |
| Other | |
| Applicable standards | ANSI / IEEE 495 |
| Internal memory | 20 000 events |
| Measured telemetry parameters | Currents (10-15% accuracy) Voltage absence/presence |
*Only for isolated neutral grounding. Min 5 km behind FPIs is required.
